MBraun Inert Glove-Box Technology

Sort By:  
MB-SSD-DIS Display for MBRAUN analyzers (1511000)
We integrate our analyzers to our PLC for our new systems. For existing systems or existing equipment, you can nonetheless use our analyzers in combination with our MB-DISPLAY and our Gas Sampling Unit (GSU). This is a stand-alone system, that means that the MB-SSD-DIS combi monitor supplies the connected analogue Measuring instruments / probes with voltage and displays their output signals as digital measured values. The displayed units can be configured according to the probes connected. The device is supplied with mains cable and two cables (approx. 5m each) for the measuring instruments themselves. You can find further information in the Operating instructions under additional information as a logged in user. (Original item number: 1500668)
Adapter: Old cable to new OX analyzer (1511001)
Adapter is required if an old OX analyzer with circular plug connection has to be replaced against a new OX analyzer with RJ45 connection. Total length: 115mm (Original item number: 5006219)
Adapter: Old cable to new MO analyzer (1511002)
Adapter is required if an old MO analyzer with circular plug connection has to be replaced against a new MO analyzer with RJ45 connection. Total length: 115mm (Original item number: 5006220)
Adapter: New cable to old OX analyzer (1511003)
Adapter is required if an old OX analyzer with round socket needs to be connected to a cable with a RJ45 plug. Total length: 115mm (Original item number: 2600402)
Adapter: New cable to old MO analyzer (1511004)
Adapter is required if an old MO analyzer with round socket needs to be connected to a cable with a RJ45 plug. Total length: 115mm (Original item number: 2600403)
MB-GSU 230V (1511005)
We integrate our analyzers to our PLC for our new systems. For existing systems or existing equipment, you can nonetheless use our analyzers in combination with our MB-DISPLAY and our Gas Sampling Unit (GSU). The gas sampling unit (GSU) supplies, via two channels, SSD probes with gas to be measured from non-flowing gas volumes. It is suitable for systems without circulation unit. (Original item number: 1500664)
Patch cable RJ45 blue l=10m (1511006)
Suitable for new MB-OX analyzers. (Original item number: 2604966)
Patch cable RJ45 green l=10m (1511007)
Suitable for new MB-MO analyzers. (Original item number: 2604966)
Patch cable RJ45 red l=10m (1511008)
Suitable for new MB-HC analyzer. (Original item number: 2610414)
Standard calibration MB-OX-SE1, 0-1000ppm (1511200)
Standard calibration of the oxygen analyzer, MB-OX-SE1, including factory calibration certificate. For processing, a declaration about decontamination is required per device. The online form is available to every logged-in user under the "Self Service" menu at shop.mbraun.de. Alternatively a PDF version is available. You will receive information regarding the return shipment only after the declaration has been approved! (Original item number: 1500282)
Standard calibration MB-OX-SE3, 0-25% (1511201)
Standard calibration of the analyzer for oxygen, MB-OX-SE3, including factory calibration certificate. For processing, a declaration about decontamination is required per device. The online form is available to every logged-in user under the "Self Service" menu. Alternatively a PDF version is available. You will receive information regarding the return shipment only after the declaration has been approved! (Original item number: 1500282)
Initial reading calibration MB-OX-SE1,0-1000ppm (1511205)
Standard calibration of the oxygen analyzer, MB-OX-SE1, including factory calibration certificate as well as documentation of the initial readings. For processing, a declaration about decontamination is required per device. The online form is available to every logged-in user under the "Self Service" menu. Alternatively a PDF version is available. You will receive information regarding the return shipment only after the declaration has been approved! (Original item number: 1500282_IR)
Initial reading calibration MB-OX-SE3, 0-25% (1511206)
Standard calibration of the oxygen analyzer, MB-OX-SE3, including factory calibration certificate as well as documentation of the initial readings. For processing, a declaration about decontamination is required per device. The online form is available to every logged-in user under the "Self Service" menu. Alternatively a PDF version is available. You will receive information regarding the return shipment only after the declaration has been approved! (Original item number: 1500282_IR)
Calibration with rental analyzer MB-OX-SE1, 0-1000 (1511210)
You will receive a rental device, corresponding functionally to your analyzer, which can be installed directly on your system. You will receive shipment information for your analyzer. After 1-2 weeks you will receive your newly calibrated analyzer. For processing, a declaration about decontamination is required for each unit, stating the serial number. Based on the declaration we can check the possibility of a rental device. You are obliged to send the rental device within 2 weeks to MBRAUN. If you do not send the rental device to MBRAUN within the specified time period, MBRAUN will charge you the value of a new analyzer.
ppm
Calibration with rental analyzer MB-OX-SE3, 0-25% (1511211)
You will receive a rental device, corresponding functionally to your analyzer, which can be installed directly on your system. You will receive shipment information for your analyzer. After 1-2 weeks you will receive your newly calibrated analyzer. For processing, a declaration about decontamination is required for each unit, stating the serial number. Based on the declaration we can check the possibility of a rental device. You are obliged to send the rental device within 2 weeks to MBRAUN. If you do not send the rental device to MBRAUN within the specified time period, MBRAUN will charge you the value of a new analyzer.
Calibration with exchange analyzer MB-OX-SE1 (1511215)
You will receive a calibrated sensor, which can be installed directly on your system and can be kept permanently or until the next calibration. For processing, a declaration about decontamination is required for each unit, stating the serial number. Based on the serial number we can check the possibility of an exchange. You are obligated to send your analyzer within 2 weeks to MBRAUN. If you do not send your analyzer to MBRAUN within the specified time period, MBRAUN will charge you the value of a new analyzer. Your analyzer becomes the property of MBRAUN and the replacement analyzer becomes your property.
0-1000ppm
Calibration with exchange analyzer MB-OX-SE3,0-25% (1511216)
You will receive a calibrated sensor, which can be installed directly on your system and can be kept permanently or until the next calibration. For processing, a declaration about decontamination is required for each unit, stating the serial number. Based on the serial number we can check the possibility of an exchange. You are obligated to send your analyzer within 2 weeks to MBRAUN. If you do not send your analyzer to MBRAUN within the specified time period, MBRAUN will charge you the value of a new analyzer. Your analyzer becomes the property of MBRAUN and the replacement analyzer becomes your property.
Standard calibration MB-MO-SE1, 0-500ppm (1511240)
Standard calibration of the analyzer for water, MB-MO-SE1, including factory calibration certificate. For processing, a declaration about decontamination is required per device. The online form is available to every logged-in user under the "Self Service" menu at shop.mbraun.de. Alternatively a PDF version is available. You will receive information regarding the return shipment only after the declaration has been approved! (Original item number: 1500272)
Initial reading calibration MB-MO-SE1, 0-500ppm (1511242)
Standard calibration of the moisture analyzer, MB-MO-SE1, including factory calibration certificate as well as documentation of the initial readings. For processing, a declaration about decontamination is required per device. The online form is available to every logged-in user under the "Self Service" menu. Alternatively a PDF version is available. You will receive information regarding the return shipment only after the declaration has been approved! (Original item number: 1500272_IR)
Calibration with rental analyzer, MB-MO-SE1, 0-500 (1511244)
You will receive a rental device, corresponding functionally to your analyzer, which can be installed directly on your system. You will receive shipment information for your analyzer. After 1-2 weeks you will receive your newly calibrated analyzer. For processing, a declaration about decontamination is required for each unit, stating the serial number. Based on the declaration we can check the possibility of a rental device. You are obliged to send the rental device within 2 weeks to MBRAUN. If you do not send the rental device to MBRAUN within the specified time period, MBRAUN will charge you the value of a new analyzer.
ppm
Per Page      161 - 180 of 432