MBraun Inert Glove-Box Technology

Sort By:  
Calibration with exchange analyzer MB-MO-SE1 (1511246)
You will receive a calibrated sensor, which can be installed directly on your system and can be kept permanently or until the next calibration. For processing, a declaration about decontamination is required for each unit, stating the serial number. Based on the serial number we can check the possibility of an exchange. You are obligated to send your analyzer within 2 weeks to MBRAUN. If you do not send your analyzer to MBRAUN within the specified time period, MBRAUN will charge you the value of a new analyzer. Your analyzer becomes the property of MBRAUN and the replacement analyzer becomes your property.
0-500ppm
Standard Calibration Set MB-OX-SE1 and MB-MO-SE1 (1511250)
Standard calibration of the analyzer for oxygen, MB-OX-SE1, and water, MB-MO-SE1, including factory calibration certificate as a set. For processing, a declaration about decontamination is required per device. The online form is available to every logged-in user under the "Self Service" menu at shop.mbraun.de. Alternatively a PDF version is available. You will receive information regarding the return shipment only after the declaration has been approved!
Standard calibration MB-OX-EC, without CO2 (1511260)
Standard calibration of the oxygen analyzer, MB-OX-EC, including factory calibration certificate. For processing, a declaration about decontamination is required per device. The online form is available to every logged-in user under the "Self Service" menu. Alternatively a PDF version is available. You will receive information regarding the return shipment only after the declaration has been approved! (Original item number: 1500271)
0-1000ppm
Standard calibration MB-OX-EC, with CO2 (1511262)
Standard calibration of the oxygen analyzer, MB-OX-EC, including factory calibration certificate. For processing, a declaration about decontamination is required per device. The online form is available to every logged-in user under the "Self Service" menu. Alternatively a PDF version is available. You will receive information regarding the return shipment only after the declaration has been approved! (Original item number: 1500271)
0-1000ppm
Standard calibration MB-OX-EC, 0-25% (1511264)
Standard calibration of the oxygen analyzer, MB-OX-EC, including factory calibration certificate. For processing, a declaration about decontamination is required per device. The online form is available to every logged-in user under the "Self Service" menu. Alternatively a PDF version is available. You will receive information regarding the return shipment only after the declaration has been approved! (Original item number: 1500271)
Calibration with rental analyzer MB-OX-EC, w/o CO2 (1511272)
You will receive a rental device, corresponding functionally to your analyzer, which can be installed directly on your system. You will receive shipment information for your analyzer. After 1-2 weeks you will receive your newly calibrated analyzer. For processing, a declaration about decontamination is required for each unit, stating the serial number. Based on the declaration we can check the possibility of a rental device. You are obliged to send the rental device within 2 weeks to MBRAUN. If you do not send the rental device to MBRAUN within the specified time period, MBRAUN will charge you the value of a new analyzer.
0-1000ppm
Calibration with rental analyzer MB-OX-EC, w CO2 (1511274)
You will receive a rental device, corresponding functionally to your analyzer, which can be installed directly on your system. You will receive shipment information for your analyzer. After 1-2 weeks you will receive your newly calibrated analyzer. For processing, a declaration about decontamination is required for each unit, stating the serial number. Based on the declaration we can check the possibility of a rental device. You are obliged to send the rental device within 2 weeks to MBRAUN. If you do not send the rental device to MBRAUN within the specified time period, MBRAUN will charge you the value of a new analyzer.
0-1000ppm
Calibration with rental analyzer MB-OX-EC, 0-25% (1511276)
You will receive a rental device, corresponding functionally to your analyzer, which can be installed directly on your system. You will receive shipment information for your analyzer. After 1-2 weeks you will receive your newly calibrated analyzer. For processing, a declaration about decontamination is required for each unit, stating the serial number. Based on the declaration we can check the possibility of a rental device. You are obliged to send the rental device within 2 weeks to MBRAUN. If you do not send the rental device to MBRAUN within the specified time period, MBRAUN will charge you the value of a new analyzer.
Calibration with exchange MB-OX-EC, w/o CO2 (1511278)
You will receive a calibrated sensor, which can be installed directly on your system and can be kept permanently or until the next calibration. For processing, a declaration about decontamination is required for each unit, stating the serial number. Based on the serial number we can check the possibility of an exchange. You are obligated to send your analyzer within 2 weeks to MBRAUN. If you do not send your analyzer to MBRAUN within the specified time period, MBRAUN will charge you the value of a new analyzer. Your analyzer becomes the property of MBRAUN and the replacement analyzer becomes your property.
0-1000ppm
Calibration with exchange MB-OX-EC, with CO2 (1511280)
You will receive a calibrated sensor, which can be installed directly on your system and can be kept permanently or until the next calibration. For processing, a declaration about decontamination is required for each unit, stating the serial number. Based on the serial number we can check the possibility of an exchange. You are obligated to send your analyzer within 2 weeks to MBRAUN. If you do not send your analyzer to MBRAUN within the specified time period, MBRAUN will charge you the value of a new analyzer. Your analyzer becomes the property of MBRAUN and the replacement analyzer becomes your property.
0-1000ppm
Calibration with exchange MB-OX-EC, 0-25% (1511282)
You will receive a calibrated sensor, which can be installed directly on your system and can be kept permanently or until the next calibration. For processing, a declaration about decontamination is required for each unit, stating the serial number. Based on the serial number we can check the possibility of an exchange. You are obligated to send your analyzer within 2 weeks to MBRAUN. If you do not send your analyzer to MBRAUN within the specified time period, MBRAUN will charge you the value of a new analyzer. Your analyzer becomes the property of MBRAUN and the replacement analyzer becomes your property.
Standard calibration MB-HC-SE1, 0-6000ppm (1511300)
Standard calibration of analyzer for solvents, MB-HC-SE1, including factory calibration certificate. For processing, a declaration about decontamination is required per device. The online form is available to every logged-in user under the "Self Service" menu. Alternatively a PDF version is available. You will receive information regarding the return shipment only after the declaration has been approved! (Original item number: 1500277)
Calibration with rental analyzer MB-HC-SE1, 0-6000 (1511302)
You will receive a rental device, corresponding functionally to your analyzer, which can be installed directly on your system. You will receive shipment information for your analyzer. After 1-2 weeks you will receive your newly calibrated analyzer. For processing, a declaration about decontamination is required for each unit, stating the serial number. Based on the declaration we can check the possibility of a rental device. You are obliged to send the rental device within 2 weeks to MBRAUN. If you do not send the rental device to MBRAUN within the specified time period, MBRAUN will charge you the value of a new analyzer.
Calibration with exchange MB-HC-SE1, 0-6000ppm (1511303)
You will receive a calibrated sensor, which can be installed directly on your system and can be kept permanently or until the next calibration. For processing, a declaration about decontamination is required for each unit, stating the serial number. Based on the serial number we can check the possibility of an exchange. You are obligated to send your analyzer within 2 weeks to MBRAUN. If you do not send your analyzer to MBRAUN within the specified time period, MBRAUN will charge you the value of a new analyzer. Your analyzer becomes the property of MBRAUN and the replacement analyzer becomes your property.
Standard calibration MB-UGP-H2 in Ar, 0-10% (1511320)
Standard calibration of analyzers, MB-UGP, including factory calibration certificate. For processing, a declaration about decontamination is required per device. The online form is available to every logged-in user under the "Self Service" menu. Alternatively a PDF version is available. You will receive information regarding the return shipment only after the declaration has been approved! (Original item number: 1500275)
Standard calibration MB-UGP-H2 in N2, 0-10% (1511321)
Standard calibration of analyzers, MB-UGP, including factory calibration certificate. For processing, a declaration about decontamination is required per device. The online form is available to every logged-in user under the "Self Service" menu. Alternatively a PDF version is available. You will receive information regarding the return shipment only after the declaration has been approved! (Original item number: 1500275)
Standard calibration MB-UGP-He in N2, 0-20% (1511322)
Standard calibration of analyzers, MB-UGP, including factory calibration certificate. For processing, a declaration about decontamination is required per device. The online form is available to every logged-in user under the "Self Service" menu. Alternatively a PDF version is available. You will receive information regarding the return shipment only after the declaration has been approved! (Original item number: 1500275)
Standard calibration MB-UGP-He in Ar, 0-30% (1511323)
Standard calibration of analyzers, MB-UGP, including factory calibration certificate. For processing, a declaration about decontamination is required per device. The online form is available to every logged-in user under the "Self Service" menu. Alternatively a PDF version is available. You will receive information regarding the return shipment only after the declaration has been approved! (Original item number: 1500275)
Standard calibration MB-UGP-Hex in N2, 0-1000ppm (1511331)
Standard calibration of analyzers, MB-UGP, including factory calibration certificate. For processing, a declaration about decontamination is required per device. The online form is available to every logged-in user under the "Self Service" menu. Alternatively a PDF version is available. You will receive information regarding the return shipment only after the declaration has been approved! (Original item number: 1500275)
Initial reading MB-UGP-He in Ar, 0-30% (1511332)
Standard calibration of the analyzer, MB-UGP-He in Ar, including factory calibration certificate as well as documentation of the initial readings. For processing, a declaration about decontamination is required per device. The online form is available to every logged-in user under the "Self Service" menu. Alternatively a PDF version is available. You will receive information regarding the return shipment only after the declaration has been approved! (Original item number: 1500275_IR)
Per Page      181 - 200 of 432