Oil Sealed Rotary Vane Pumps

Old Sealed Rotary Vane Pumps are available in various models.
Sort By:  
E2M28 115V/200-230V 50/60Hz A37317984 (A37317984)
The EM range of oil sealed rotary pumps renowned for their high ultimate vacuum, rapid pumping speed, quiet operation and ability to handle vapour have become the industry standard for laboratory and light industrial applications. The pump is a freestanding unit with the drive provided through a flexible coupling by either a single phase or three phase (four pole) motor.Each EM pump is supplied with 1 litre of Ultragrade 19 oil, O ring and centering ring, two Allen keys and spares seal for oil drain and filter plugs. For PFPE prepared FX pumps Fomblin® to be ordered separately.
E2M18 115V/200-230V 50/60Hz A36317984 (A36317984)
The EM range of oil sealed rotary pumps renowned for their high ultimate vacuum, rapid pumping speed, quiet operation and ability to handle vapour have become the industry standard for laboratory and light industrial applications. The pump is a freestanding unit with the drive provided through a flexible coupling by either a single phase or three phase (four pole) motor.Each EM pump is supplied with 1 litre of Ultragrade 19 oil, O ring and centering ring, two Allen keys and spares seal for oil drain and filter plugs. For PFPE prepared FX pumps Fomblin® to be ordered separately.
E2M1.5 200-230V 50/60HZ IEC A37132919 (A37132919)
E2M0.7 and E2M1.5 two stage oil sealed rotary vane pumps are renowned for achieving high ultimate vacuum and rapid pumping speeds, with quiet operation and compact size. Providing long term reliability, these pumps have become the industry standard in range of scientific and laboratory applications, and the ideal partner for your tubomolecular pump.The drive is provided through and Oldham coupling by a single phase motor. The motor is totally enclosed and cooled by the motor-cooling fan which directs the air along the motor fins. A thermal overload devise is fitted to the motor which switches off the pump if the motor gets too hot, this will automatically reset when the motor cools down and restarts the pump.
E2M0.7 200-230V 50/60HZ IEC A37141919 (A37141919)
E2M0.7 and E2M1.5 two stage oil sealed rotary vane pumps are renowned for achieving high ultimate vacuum and rapid pumping speeds, with quiet operation and compact size. Providing long term reliability, these pumps have become the industry standard in range of scientific and laboratory applications, and the ideal partner for your tubomolecular pump.The drive is provided through and Oldham coupling by a single phase motor. The motor is totally enclosed and cooled by the motor-cooling fan which directs the air along the motor fins. A thermal overload devise is fitted to the motor which switches off the pump if the motor gets too hot, this will automatically reset when the motor cools down and restarts the pump.
E1M18 115V/200-230V 50/60Hz A34317984 (A34317984)
The EM range of oil?sealed rotary pumps renowned for their high ultimate vacuum, rapid pumping speed, quiet operation and ability to handle vapour have become the industry standard for laboratory and light industrial applications. The pump is a freestanding unit with the drive provided through a flexible coupling by either a single phase or three phase (four pole) motor.Each EM pump is supplied with 1 litre of Ultragrade 19 oil, O ring and centering ring, two Allen keys and spares seal for oil drain and filter plugs. For PFPE prepared FX pumps Fomblin® to be ordered separately.
E-Lab 2 Pump 115V 1Ø A65207906 (A65207906)
This pump was specifically developed for wet chemistry and sample preparation. It is ideal for use with rotary evaporators, centrifugal concentrators, vacuum ovens, distillation/extraction apparatus, fume hoods, and vacuum filtration apparatus.An internal cartridge design provides easy servicing and the continuous oil recycling permits constant running. The E-LAB 2 pump has a high efficiency mist filter which eliminates any oil smell.Ordering Information: Supplied with manufacturers one-year warranty. Complete with a standard nozzle kit for connection to any system.CSA certified and CE marked.
E-Lab 2 Pump 230V 1Ø A65207903 (A65207903)
This pump was specifically developed for wet chemistry and sample preparation. It is ideal for use with rotary evaporators, centrifugal concentrators, vacuum ovens, distillation/extraction apparatus, fume hoods, and vacuum filtration apparatus.An internal cartridge design provides easy servicing and the continuous oil recycling permits constant running. The E-LAB 2 pump has a high efficiency mist filter which eliminates any oil smell.Ordering Information: Supplied with manufacturers one-year warranty. Complete with a standard nozzle kit for connection to any system.CSA certified and CE marked.
Edwards RV12 Vacuum Pump 115/220-240V A65501903 (A65501903)
The Edwards RV12 vacuum pump delivers excellent ultimate vacuum pressure, high pumping speeds and superior vapor handling capabilities with quiet operation. With over 300,000 units produced, these pumps offer proven performance that sets the industry standard for R&D and scientific pumping applications. All RV pumps are approved to UL and CSA standards by an external test house and feature our unique mode selector switch, meaning one model is suitable for both high vacuum or high throughput applications. In summary, you can rest assured that when you choose an Edwards RV oil sealed rotary vane pump you are choosing a product you can rely on from a company you can trust.
Supplied with: 1 litre of Ultragrade 19 oil, inlet filter and O-ring. Fomblin® must be purchased separately for PFPE RV pumps.The Edwards RV12 series of small oil sealed rotary vane pumps deliver excellent ultimate vacuum pressure, high pumping speeds and superior vapor handling capabilities with quiet operation. With over 300,000 units produced, these pumps offer proven performance that sets the industry standard for R&D and scientific pumping applications. All RV pumps are approved to UL and CSA standards by an external test house and feature our unique mode selector switch, meaning one model is suitable for both high vacuum or high throughput applications. In summary, you can rest assured that when you choose an Edwards RV5 vacuum pump you are choosing a product you can rely on from a company you can trust.

The Edwards RV12 vacuum pump is the result of more than 75 years’ experience and a clean sheet design programme to produce the ultimate range of small oil sealed rotary vane pumps.

These rugged vacuum pumps offer an excellent ultimate with good pumping speeds as well as superior vapor handling capabilities and quiet operation. Edwards RV series of vacuum pumps have become the industry standard with over 200,000 units sold. This success has been based on field proven design and reliability in a wide range of applications and environments.

High Vapor Handling:
Quicker Process

 Superior Particulate Handling:
High Reliability

Fast Acting, Dependable Inlet Valve for Anti-Suck Back Protection:
Safe Process & Systems

Mode Selector & Two Position Gas Ballast:
Configured to Meet Your Vacuum Needs

Designed for Easy Maintenance:
No Unplanned Downtime

Quiet Running:
-Better Work Environment
-Analytical instruments – LCMS
-Distillation
-Extraction
-Filtration
-Freeze drying
-Gel drying
-Solvent recovery
-Centrifugal evaporation

DUSTY APPLICATIONS
-Furnaces
-De-gassing

 CLEAN DRY APPLICATIONS
-Analytical instruments – GCMS
-Centrifuges
-Coating
-Turbo pump backing
-Gas bottlefilling/emptying
-Leak detectors
-Load locks
-Electron microscopes

SPECIAL APPLICATIONS
Where your application does not fall into one of the other categories, we can offer pumps specifically designed to meet your requirements. Past examples of these include:
-PFPE prepared pumps
Versions compatible with brake fluid
-ATEX approved pumps
-Air driven motor variants for oil and gas rig
-Many of these variants have gone on to become standard catalogue items, so if you have an unusual application please ask your local salesman and we will be pleased to help

KEY FEATURES AND BENEFITS 
WET PUMPING 
Key benefits of Edwards RV12 vacuum pump for “wet” applications:
-Highest vapor pumping capacity of any rotary vane pump
-Unique mode selector switch means pump maintains lubrication at high flow
-Highest gas ballast flow of any rotary vane pump giving 220g/hr (290g/hr on RV12) water vapor handling capacity
-Optional oil return kit to ensure the oil stays in the pump at high flow

For applications where the solvents/vapors are incompatible with fluoroelastomer (FKM) seals, a nitrile (Buna-N) conversion kit is available. Additionally PFPE prepared pumps may be ordered if pumping large quantities of oxidants.

DUSTY 
Key benefits of Edwards RV12 vacuum pump for “dusty” applications
-Best in class anti-suck back protection to prevent dust getting back into the process.Controlled opening by oil pressure to eliminate pressure surge.Rapid closing within 0.4 seconds of pump stopping due to dump valve.
-Large diameter oil passages (3-5mm) to avoid cloggingSome competitor pumps have oil passages of less than 1mm diameter.

Designed using experience of PVD and CVD applications from the semiconductor industry, Edwards range of RV pumps are ideal for dusty applications.

CLEAN/DRY
Key benefits of Edwards RV12 vacuum pump for clean/dry applications
-Unique mode selector switch means pump maintains lubrication at high flow
-Optional oil return kit to ensure the oil stays in the pump at high flow
-Best in class anti-suck back protection to prevent oil mist getting back into the process
-Controlled opening by oil pressure to eliminate pressure surge
-Rapid closing within 0.4 seconds of pump stopping due to dump valve.

The patented mode selector means that the pump is equally happy in either high vacuum applications or high throughput applications. For the latter an optional oil return kit can be fitted that allows the pump to operate continuously at high throughput without losing all its oil down the exhaust line.

OXIDANTS
Key benefits of Edwards RV12 vacuum pump for pumping oxidants:
-Highest gas ballast of any rotary vane pump.Allows dilution of pumped gases to minimize oxidation of the oil
-PFPE variants available.Ideal for pumping oxygen and halogenated compound.

The high gas ballast of the RV pumps allows higher flows of oxygen whilst maintaining dilution to below the lower explosive limit. When combined with the optional oil return kit to prevent the gas ballast from blowing all the oil into the exhaust and a PFPE prepared pump to avoid oxidation of the oil, the RV pump makes a solid pump for oxygen. Equally these same features make the RV pumps ideal for pumping other oxidants such as halogens and halogenated compounds. For these compounds fire/explosion is not an issue, but a gas ballast is still useful for dilution to protect the oil and bearings. PFPE should be used to prolong oil life.
Edwards RV3 115/220-240V A65201903 (A65201903)
The Edwards RV3 series of small oil sealed rotary vane pumps deliver excellent ultimate vacuum pressure, high pumping speeds and superior vapor handling capabilities with quiet operation. With over 300,000 units produced, these pumps offer proven performance that sets the industry standard for R&D and scientific pumping applications. All RV pumps are approved to UL and CSA standards by an external test house and feature our unique mode selector switch, meaning one model is suitable for both high vacuum or high throughput applications. In summary, you can rest assured that when you choose an Edwards RV oil sealed rotary vane pump you are choosing a product you can rely on from a company you can trust.The success has been based on field proven design and reliability in a wide range of applications and environments.

High Vapor Handling:
Quicker Process

Superior Particulate Handling:High Reliability

Fast Acting, Dependable Inlet Valve for Anti-Suck Back Protection:
Safe Process & Systems

Mode Selector & Two Position Gas Ballast:Configured to Meet Your Vacuum Needs

Designed for Easy Maintenance:
No Unplanned Downtime

Quiet Running:
Better Work Environment

-Analytical instruments – LCMS
Distillation
-Extraction
-Filtration
-Freeze drying
-Gel drying
-Solvent recovery
-Centrifugal evaporation

DUSTY APPLICATIONS
-Furnaces
-De-gassing

CLEAN DRY APPLICATIONS
-Analytical instruments – GCMS
Centrifuges
-Coating
-Turbo pump backing
-Gas bottle filling/emptying
-Leak detectors
-Load locks
-Electron microscopes

SPECIAL APPLICATIONS
Where your application does not fall into one of the other categories, we can offer pumps specifically designed to meet your requirements. Past examples of these include:
-PFPE prepared pumps
-Versions compatible with brake fluid
-ATEX approved pumps
-Air driven motor variants for oil and gas rig
-Many of these variants have gone on to become standard catalogue items, so if you have an unusual application please ask your local salesman and we will be pleased to help

KEY FEATURES AND BENEFITS OF THE Edwards RV3WET PUMPING
Key benefits of Edwards RV3 pumps for “wet” applications:
-Highest vapor pumping capacity of any rotary vane pump
-Unique mode selector switch means pump maintains lubrication at high flow
-Highest gas ballast flow of any rotary vane pump giving 220g/hr (290g/hr on RV12) water vapor handling capacity
-Optional oil return kit to ensure the oil stays in the pump at high flow

For applications where the solvents/vapors are incompatible with fluoroelastomer (FKM) seals, a nitrile (Buna-N) conversion kit is available. Additionally PFPE prepared pumps may be ordered if pumping large quantities of oxidants.

DUSTY
Key benefits of Edwards RV3 pumps for “dusty” applications
-Best in class anti-suck back protection to prevent dust getting back into the process
Controlled opening by oil pressure to eliminate pressure surge
Rapid closing within 0.4 seconds of pump stopping due to dump valve
-Large diameter oil passages (3-5mm) to avoid clogging.Some competitor pumps have oil passages of less than 1mm diameter

Designed using experience of PVD and CVD applications from the semiconductor industry, Edwards range of RV pumps are ideal for dusty applications.

CLEAN/DRY
Key benefits of Edwards RV3 pumps for clean/dry applications
-Unique mode selector switch means pump maintains lubrication at high flow
-Optional oil return kit to ensure the oil stays in the pump at high flow
-Best in class anti-suck back protection to prevent oil mist getting back into the process.Controlled opening by oil pressure to eliminate pressure surge.Rapid closing within 0.4 seconds of pump stopping due to dump valve

The patented mode selector means that the pump is equally happy in either high vacuum applications or high throughput applications. For the latter an optional oil return kit can be fitted that allows the pump to operate continuously at high throughput without losing all its oil down the exhaust line.

OXIDANTS
Key benefits of Edwards RV3 pumps for pumping oxidants:
-Highest gas ballast of any rotary vane pump.Allows dilution of pumped gases to minimize oxidation of the oil.
-PFPE variants available Ideal for pumping oxygen and halogenated compound

The high gas ballast of the RV pumps allows higher flows of oxygen whilst maintaining dilution to below the lower explosive limit. When combined with the optional oil return kit to prevent the gas ballast from blowing all the oil into the exhaust and a PFPE prepared pump to avoid oxidation of the oil, the RV pump makes a solid pump for oxygen. Equally these same features make the RV pumps ideal for pumping other oxidants such as halogens and halogenated compounds. For these compounds fire/explosion is not an issue, but a gas ballast is still useful for dilution to protect the oil and bearings. PFPE should be used to prolong oil life.
Edwards RV5 Vacuum Pump 115/220-240V A65301903 (A65301903)
The Edwards RV5 series of small oil sealed rotary vane pumps deliver excellent ultimate vacuum pressure, high pumping speeds and superior vapor handling capabilities with quiet operation. With over 300,000 units produced, these pumps offer proven performance that sets the industry standard for R&D and scientific pumping applications. All RV pumps are approved to UL and CSA standards by an external test house and feature our unique mode selector switch, meaning one model is suitable for both high vacuum or high throughput applications. In summary, you can rest assured that when you choose an Edwards RV5 vacuum pump you are choosing a product you can rely on from a company you can trust.

The Edwards RV5 vacuum pump is the result of more than 75 years’ experience and a clean sheet design programme to produce the ultimate range of small oil sealed rotary vane pumps.

These rugged vacuum pumps offer an excellent ultimate with good pumping speeds as well as superior vapour handling capabilities and quiet operation. Edwards RV series of vacuum pumps have become the industry standard with over 200,000 units sold. This success has been based on field proven design and reliability in a wide range of applications and environments.

High Vapor Handling:
Quicker Process

Superior Particulate Handling:
High Reliability

Fast Acting, Dependable Inlet Valve for Anti-Suck Back Protection:
Safe Process & Systems

Mode Selector & Two Position Gas Ballast:
Configured to Meet Your Vacuum Needs

 Designed for Easy Maintenance:
No Unplanned Downtime

Quiet Running
-Better Work Environment
-Analytical instruments – LCMS
-Distillation
-Extraction
-Filtration
-Freeze drying
-Gel drying
-Solvent recovery
-Centrifugal evaporation

DUSTY APPLICATIONS
-Furnaces
-De-gassing

CLEAN DRY APPLICATIONS
-Analytical instruments – GCMS
-Centrifuges
-Coating
-Turbo pump backing
-Gas bottle filling/emptying
-Leak detectors
-Load locks
-Electron microscopes

SPECIAL APPLICATIONS
Where your application does not fall into one of the other categories, we can offer pumps specifically designed to meet your requirements. Past examples of these include:
-PFPE prepared pumps
-Versions compatible with brake fluid
-ATEX approved pumps
-Air driven motor variants for oil and gas rig
-Many of these variants have gone on to become standard catalogue items, so if you have an unusual application please ask your local salesman and we will be pleased to help

KEY FEATURES AND BENEFITS
WET PUMPING
Key benefits of Edwards RV5 vacuum pump for “wet” applications:
-Highest vapour pumping capacity of any rotary vane pump
-Unique mode selector switch means pump maintains lubrication at high flow
-Highest gas ballast flow of any rotary vane pump giving 220g/hr (290g/hr on RV12) water vapor handling capacity
-Optional oil return kit to ensure the oil stays in the pump at high flow

For applications where the solvents/vapors are incompatible with fluoroelastomer (FKM) seals, a nitrile (Buna-N) conversion kit is available. Additionally PFPE prepared pumps may be ordered if pumping large quantities of oxidants.

DUSTY
Key benefits of Edwards RV5 vacuum pump for “dusty” applications
-Best in class anti-suck back protection to prevent dust getting back into the process.Controlled opening by oil pressure to eliminate pressure surge.Rapid closing within 0.4 seconds of pump stopping due to dump valve
-Large diameter oil passages (3-5mm) to avoid clogging.Some competitor pumps have oil passages of less than 1mm diameter.

Designed using experience of PVD and CVD applications from the semiconductor industry, Edwards range of RV pumps are ideal for dusty applications.

CLEAN/DRY
Key benefits of Edwards RV5 vacuum pump for clean/dry applications
-Unique mode selector switch means pump maintains lubrication at high flow
-Optional oil return kit to ensure the oil stays in the pump at high flow.
Best in class anti-suck back protection to prevent oil mist getting back into the process.
Controlled opening by oil pressure to eliminate pressure surge.Rapid closing within 0.4 seconds of pump stopping due to dump valve

The patented mode selector means that the pump is equally happy in either high vacuum applications or high throughput applications. For the latter an optional oil return kit can be fitted that allows the pump to operate continuously at high throughput without losing all its oil down the exhaust line.

OXIDANTS
Key benefits of Edwards RV5 vacuum pump for pumping oxidants:
-Highest gas ballast of any rotary vane pump
Allows dilution of pumped gases to minimize oxidation of the oil
-PFPE variants available.
Ideal for pumping oxygen and halogenated compound

The high gas ballast of the RV pumps allows higher flows of oxygen whilst maintaining dilution to below the lower explosive limit. When combined with the optional oil return kit to prevent the gas ballast from blowing all the oil into the exhaust and a PFPE prepared pump to avoid oxidation of the oil, the RV pump makes a solid pump for oxygen. Equally these same features make the RV pumps ideal for pumping other oxidants such as halogens and halogenated compounds. For these compounds fire/explosion is not an issue, but a gas ballast is still useful for dilution to protect the oil and bearings. PFPE should be used to prolong oil life.
Edwards RV8 vacuum pump 115/220-240V A65401903 (A65401903)
The Edwards RV8 vacuum pump delivers excellent ultimate vacuum pressure, high pumping speeds and superior vapor handling capabilities with quiet operation. With over 300,000 units produced, these pumps offer proven performance that sets the industry standard for R&D and scientific pumping applications. All RV pumps are approved to UL and CSA standards by an external test house and feature our unique mode selector switch, meaning one model is suitable for both high vacuum or high throughput applications. In summary, you can rest assured that when you choose an Edwards RV oil sealed rotary vane pump you are choosing a product you can rely on from a company you can trust.Supplied with: 1 litre of Ultragrade 19 oil, inlet filter and O-ring. Fomblin® must be purchased separately for PFPE RV pumps.The Edwards RV8 series of small oil sealed rotary vane pumps deliver excellent ultimate vacuum pressure, high pumping speeds and superior vapor handling capabilities with quiet operation. With over 300,000 units produced, these pumps offer proven performance that sets the industry standard for R&D and scientific pumping applications. All RV pumps are approved to UL and CSA standards by an external test house and feature our unique mode selector switch, meaning one model is suitable for both high vacuum or high throughput applications. In summary, you can rest assured that when you choose an Edwards RV5 vacuum pump you are choosing a product you can rely on from a company you can trust.

The Edwards RV8 vacuum pump is the result of more than 75 years’ experience and a clean sheet design programme to produce the ultimate range of small oil sealed rotary vane pumps.

These rugged vacuum pumps offer an excellent ultimate with good pumping speeds as well as superior vapor handling capabilities and quiet operation. Edwards RV series of vacuum pumps have become the industry standard with over 200,000 units sold. This success has been based on field proven design and reliability in a wide range of applications and environments.

High Vapor Handling:
Quicker Process

Superior Particulate Handling:
High Reliability

Fast Acting, Dependable Inlet Valve for Anti-Suck Back Protection:
Safe Process & Systems

Mode Selector & Two Position Gas Ballast:Configured to Meet Your Vacuum Needs

Designed for Easy Maintenance:
No Unplanned Downtime

-Quiet Running
-Better Work Environment
-Analytical instruments – LCMS
-Distillation
-Extraction
-Filtration
-Freeze drying
-Gel drying
-Solvent recovery
-Centrifugal evaporation

DUSTY APPLICATIONS
-Furnaces
-De-gassing

CLEAN DRY APPLICATIONS

-Analytical instruments – GCMS
-Centrifuges
-Coating
-Turbo pump backing
-Gas bottle filling/emptying
-Leak detectors
-Load locks
-Electron microscopes

SPECIAL APPLICATIONS
Where your application does not fall into one of the other categories, we can offer pumps specifically designed to meet your requirements. Past examples of these include:
-PFPE prepared pumps
-Versions compatible with brake fluid
-ATEX approved pumps
-Air driven motor variants for oil and gas rig
-Many of these variants have gone on to become standard catalogue items, so if you have an unusual application please ask your local salesman and we will be pleased to help

KEY FEATURES AND BENEFITS
WET PUMPING
Key benefits of Edwards RV8 vacuum pump for “wet” applications:
-Highest vapor pumping capacity of any rotary vane pump
-Unique mode selector switch means pump maintains lubrication at high flow
-Highest gas ballast flow of any rotary vane pump giving 220g/hr (290g/hr on RV12) water vapor handling capacity
-Optional oil return kit to ensure the oil stays in the pump at high flow

For applications where the solvents/vapors are incompatible with fluoroelastomer (FKM) seals, a nitrile (Buna-N) conversion kit is available. Additionally PFPE prepared pumps may be ordered if pumping large quantities of oxidants.

DUSTY
Key benefits of Edwards RV8 vacuum pump for “dusty” applications

-Best in class anti-suck back protection to prevent dust getting back into the process.Controlled opening by oil pressure to eliminate pressure surge.Rapid closing within 0.4 seconds of pump stopping due to dump valve.
-Large diameter oil passages (3-5mm) to avoid clogging.Some competitor pumps have oil passages of less than 1mm diameter.

Designed using experience of PVD and CVD applications from the semiconductor industry, Edwards range of RV pumps are ideal for dusty applications.

CLEAN/DRY
Key benefits of Edwards RV8 vacuum pump for clean/dry applications
-Unique mode selector switch means pump maintains lubrication at high flow
-Optional oil return kit to ensure the oil stays in the pump at high flow
-Best in class anti-suck back protection to prevent oil mist getting back into the process
-Controlled opening by oil pressure to eliminate pressure surge
-Rapid closing within 0.4 seconds of pump stopping due to dump valve

The patented mode selector means that the pump is equally happy in either high vacuum applications or high throughput applications. For the latter an optional oil return kit can be fitted that allows the pump to operate continuously at high throughput without losing all its oil down the exhaust line.

OXIDANTS
Key benefits of Edwards RV8 vacuum pump for pumping oxidants:
-Highest gas ballast of any rotary vane pump.Allows dilution of pumped gases to minimize oxidation of the oil
-PFPE variants available.Ideal for pumping oxygen and halogenated compound.

The high gas ballast of the RV pumps allows higher flows of oxygen whilst maintaining dilution to below the lower explosive limit. When combined with the optional oil return kit to prevent the gas ballast from blowing all the oil into the exhaust and a PFPE prepared pump to avoid oxidation of the oil, the RV pump makes a solid pump for oxygen. Equally these same features make the RV pumps ideal for pumping other oxidants such as halogens and halogenated compounds. For these compounds fire/explosion is not an issue, but a gas ballast is still useful for dilution to protect the oil and bearings. PFPE should be used to prolong oil life.
Per Page      1 - 13 of 13
  • 1