Traps and Mist Filters

Sort By:  
EMF10 Oil Mist Filter NW25 A46226000 (A46226000)
Mist filters capture oil mist from the outlet of pumps, which would otherwise be ejected into the atmosphere. This may happen when you use gas ballast or when you pump high gas throughputs. You can also return oil trapped in the mist filter back to the pump, although you must ensure that the process gases will not contaminate the pump or pump oil. The EMF10 mist filter is suitable for use with RV3, RV5 and RV8 pumps. They are very efficient at 99.999% DOP test and are also azide proof. The white bottom half of the body is semi-transparent, allowing the oil level to be monitored. The EMF filters have a unique odor element which neutralizes the smell of oil mist.Supplied with NW25 clamp, centering ring and O ring, NW25 to 3/4 inch BSP adaptor.
EMF20 Nylon 11 NW25 A46242000 (A46242000)
Mist filters capture oil mist from the outlet of pumps, which would otherwise be ejected into the atmosphere. This may happen when you use gas ballast or when you pump high gas throughputs. You can also return oil trapped in the mist filter back to the pump, although you must ensure that the process gases will not contaminate the pump or pump oil.
EMF20 Oil Mist Filter NW25 A46229000 (A46229000)
Mist filters capture oil mist from the outlet of pumps, which would otherwise be ejected into the atmosphere. This may happen when you use gas ballast or when you pump high gas throughputs. You can also return oil trapped in the mist filter back to the pump, although you must ensure that the process gases will not contaminate the pump or pump oil. The EMF20 mist filter is suitable for use with RV12 and E2M18 pumps. The EMF20 mist filter can be used with an E2M28 on low pressure applications; contact Edwards. They are very efficient at 99.999% DOP test and are also azide proof. The white bottom half of the body is semi-transparent, allowing the oil level to be monitored. The EMF filters have a unique odor element which neutralizes the smell of oil mist.Supplied with NW25 clamp, centering ring and O ring, NW25 to 3/4 inch BSP adaptor.
EMF3 Oil Mist Filter NW10 A46220000 (A46220000)
Mist filters capture oil mist from the outlet of pumps, which would otherwise be ejected into the atmosphere. This may happen when you use gas ballast or when you pump high gas throughputs. You can also return oil trapped in the mist filter back to the pump, although you must ensure that the process gases will not contaminate the pump or pump oil.The EMF3 mist filter is suitable for use with E2M0.7, E2M1.5 and Speedivac 2 pumps. They are very efficient at 99.999% DOP test and are also azide proof. The white bottom half of the body is semi-transparent, allowing the oil level to be monitored. The EMF filters have a unique odor element which neutralizes the smell of oil mist.Supplied with NW10 clamp, centering ring and O-ring, NW10 to 3/8 inch BSP adaptor.
FL20K Foreline Trap A13305000 (A13305000)
The FL20K foreline trap has been developed for use in clean pumping systems, to prevent the back-migration of rotary pump oil mist into the system.The FL20K is most useful with two-stage rotary pumps, operating below 1 mbar. To maximize sorbent life, install the FL20K near the vacuum system. In common with other types of sorbent, activated alumina absorbs water. This does not affect the oil vapor trapping properties but may tend to prolong the roughing time on successive pump downs. To minimize vapor absorption, we recommend you fit a valved by-pass line.The trap body is made of aluminum and is fitted with a removable basket containing the sorbent.
ITC20K Inlet Chemical Trap A44410000 (A44410000)
These catchpots minimize the entry of condensable vapors into the pump. Sorbent charge not supplied. Supplied with NW25 clamp, centering ring and ring.Inlet traps, dust filters and catchpots body is made of aluminum material with a detachable metal top cover.The inlet-port is at a tangent to the body to achieve a degree of centrifugal separation of solid and liquid particles.All inlet traps, catchpots and filters of the same size and dimensions have the same body. The traps and filters have containers and filter elements which fit inside the body.For the protection of pumping system they should be installed as close to the vacuum pumping system as is possible.The ITC Inlet Chemical Trap prevents the pump against aggressive or heavy, lacquer-forming vapours which may harm the pump or contaminate the pump oil.
ITD20K Inlet Desiccant Trap A44510000 (A44510000)
Inlet traps, dust filters and catchpots body is made of aluminum material with a detachable metal top cover.The inlet-port is at a tangent to the body to achieve a degree of centrifugal separation of solid and liquid particles.All inlet traps, catchpots and filters of the same size and dimensions have the same body. The traps and filters have containers and filter elements which fit inside the body.For the protection of pumping system they should be installed as close to the vacuum pumping system as is possible.
ITF20K Inlet Dust Filter A44215000 (A44215000)
The ITF inlet dust filters prevent the entry of dust particles into the pump. The impedance of a clean filter reduces the pumping speed of a 20 m3h-1 pump by about 20% at 1 mbar and 25% at 10 mbar. Depending on your application, you can normally clean the filter element with a vacuum cleaner or a clean air blast, and then re-use the element.
ITO20K Inlet Catchpot A44110000 (A44110000)
These catchpots minimize the entry of condensable vapors into the pump. Supplied with NW25 clamp, centering ring and O ring.Inlet traps, dust filters and catchpots body is made of aluminum material with a detachable metal top cover.The inlet-port is at a tangent to the body to achieve a degree of centrifugal separation of solid and liquid particles.All inlet traps, catchpots and filters of the same size and dimensions have the same body. The traps and filters have containers and filter elements which fit inside the body.For the protection of pumping system they should be installed as close to the vacuum pumping system as is possible.
MF30 Outlet Mist Filter Fits E2M28 A46233000 (A46233000)
Mist filters capture oil mist from the outlet of pumps, which would otherwise be ejected into the atmosphere. This may happen when you use gas ballast or when you pump high gas throughputs. You can also return oil trapped in the mist filter back to the pump, although you must ensure that the process gases will not contaminate the pump or pump oil. The MF30 is suitable for E2M28 pumps. It is very efficient at 99.85% DOP test. You can monitor the oil level through the sight-glass provided. Supplied with NW25 elbow, NW25 clamp, NW25 to 3/4 inch BSP adapter and NW25 Co-Seal.
Small Pump Inlet Catchpot A44105000 (A44105000)
These catchpots minimize the entry of condensable vapors into the pump. Supplied with NW25 clamp, centering ring and O ring.
XDS NW25 Inlet Outlet filter A50597805 (A50597805)
The inlet dust filter has two functions. It can be connected inline between the pump inlet and the chamber outlet connection to preclude dust from migrating into the system. Alternatively, it can be connected inline between the pump exhaust and the exhaust extraction system. The filter is supplied ready to use with a 5 micron element.
Per Page      1 - 13 of 13
  • 1