MBRAUN Spares And Parts

(Original item number: 2400040)

(Original item number: 2400136)

Suitable for fixing gloves to the gloveport. 2 clamping rings are required for each glove. (Original item number: 2600239)

NBR Perbunan

O-Ring (for antechamber) D=390mm, 394x6, FPM Viton

Mounted in article 1513400 (Original item number: 2403017)

Filter material: hydrophobic PTFE membrane Adapter: open on one side (SOE), 7002, with bayonet adapter and centering tip Retention rate 0.2

Includes the Filter element for the oil mist filter. (Original item number: 3240539)

Length: 200mm Round thread: 72mm (Original item number: 2601460)

PA60/PA120 Length: 200mm Round thread: 72mm (Original item number: 2600589)

Analyzer for measuring hydrogen in argon atmosphere. Measuring range: 0-10% Operating voltage: 110-240VAC The UGB is supplied with the sample gas of the box by a closed loope system. The measured value can be displayed via the system control (SPS) of MBRAUN standard systems or above the optionally available independent MBRAUN SSD-DIS combination monitor. Calibration must be performed by MBRAUN will be. (Original item number: 1500802)

Electrochemical Oxygen analyzer to be used when atmosphere is not dry or when a lot of solvent vapors are present. The analyzer MB-OX-EC monitors the oxygen content in inert gases. The analyzer can be used in combination with the system control (PLC) of MBRAUN standard systems or as standalone oxygen-measuring-system with the optionally available MBRAUN SSD-DIS combi-monitor. (Original item number: 1500816)

Electrochemical Oxygen analyzer to be used when atmosphere is not dry or when a lot of solvent vapors are present. The analyzer MB-OX-EC monitors the oxygen content in inert gases. The analyzer can be used in combination with the system control (PLC) of MBRAUN standard systems or as standalone oxygen-measuring-system with the optionally available MBRAUN SSD-DIS combi-monitor. (Original item number: 1500716)

Electrochemical Oxygen analyzer to be used when atmosphere is not dry or when a lot of solvent vapors are present. The analyzer MB-OX-EC monitors the oxygen content in inert gases. The analyzer can be used in combination with the system control (PLC) of MBRAUN standard systems or as standalone oxygen-measuring-system with the optionally available MBRAUN SSD-DIS combi-monitor. (Original item number: 1500818)

Electrochemical Oxygen analyzer to be used when atmosphere is not dry or when a lot of solvent vapors are present. The analyzer MB-OX-EC monitors the oxygen content in inert gases. The analyzer can be used in combination with the system control (PLC) of MBRAUN standard systems or as standalone oxygen-measuring-system with the optionally available MBRAUN SSD-DIS combi-monitor. Measuring range: 0 to 25% (Original item number: 1500819)

Electrochemical Oxygen analyzer to be used when atmosphere is not dry or when a lot of solvent vapors are present. The analyzer MB-OX-EC monitors the oxygen content in inert gases. The analyzer can be used in combination with the system control (PLC) of MBRAUN standard systems or as standalone oxygen-measuring-system with the optionally available MBRAUN SSD-DIS combi-monitor. Measuring range: 0 to 25% (Original item number: 1500820)

The MB-HC-SE1 analyzer is designed for monitoring of VOCs (volatile organic compounds) in inert gases or air. Since the sensor is calibrated for hexane, the Solvent detectable depending on RF-factor. Measuring range: 0-6000ppm The measured value can be displayed via the system control (SPS) of MBRAUN standard systems or above the optionally available independent MBRAUN SSD-DIS combination monitor. Calibration must be performed by MBRAUN will be. (Original item number: 1500678)

Analyzer for measuring helium in argon atmosphere. Measuring range: 0-30% Operating voltage: 110-240VAC The UGB is supplied with the sample gas of the box by a closed loope system. The measured value can be displayed via the system control (SPS) of MBRAUN standard systems or above the optionally available independent MBRAUN SSD-DIS combination monitor. Calibration must be performed by MBRAUN will be. (Original item number: 6000257)

Analyzer for measuring helium in argon atmosphere. Measuring range: 0-100% Operating voltage: 110-240VAC The UGB is supplied with the sample gas of the box by a closed loope system. The measured value can be displayed via the system control (SPS) of MBRAUN standard systems or above the optionally available independent MBRAUN SSD-DIS combination monitor. Calibration must be performed by MBRAUN will be. (Original item number: 6000264)

Analyzer for measuring helium in nitrogen atmosphere. Measuring range: 0-100% Operating voltage: 110-240VAC The UGB is supplied with the sample gas of the box by a closed loope system. The measured value can be displayed via the system control (SPS) of MBRAUN standard systems or above the optionally available independent MBRAUN SSD-DIS combination monitor. Calibration must be performed by MBRAUN will be. (Original item number: 6000259)